Scooter Belt Mitsuboshi

Tersedia scooter belt untuk motor metik.

Honda Beat
Honda Vario
Honda Vario Injection
Honda Scoopy
Suzuki Spin
Suzuki Skywave
Suzuki Hayate
Yamaha Mio
Yamaha Mio J
Yamaha Soul
Kymco Trend
Kymco FreeLX
Kymco Easy

Angular Contact Ball Bearings

Single row angular contact ball bearings

Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. The raceways of the inner and outer rings are offset in relation to each other in the direction of the bearing axis. The bearings are available in open and sealed versions. Their self-alignment capacity is very small.

X-life

Many sizes of angular contact ball bearings are supplied in X-life design. These bearings are indicated in the dimension tables. Bearings of X-life quality have an improved raceway geometry as well as optimised surfaces. This gives a significant increase in the fatigue limit load of the bearings. In calculation of the expanded adjusted rating life, values up to 50% higher are achieved. In certain applications, a smaller design of bearing arrangement can therefore be used if necessary.

70..-B	20 - 40	contact angle α = 40°
70..-B-2RS	20 - 40	contact angle α = 40°, lip seals on both sides
718..-B	30 - 80	main dimensions to DIN 628-1, contact angle α = 40°
72..-B	10 - 170	main dimensions to DIN 628-1, contact angle α = 40°
72..-B-2RS	10 - 60	main dimensions to DIN 628-1, contact angle α = 40°, lip seals on both sides
73..-B	12 - 170	main dimensions to DIN 628-1, contact angle α = 40°
73..-B-2RS	15 - 40	main dimensions to DIN 628-1, contact angle α = 40°, lip seals on both sides

Double row angular contact ball bearings

Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design than these. They differ in the size of their contact angle and the design of the bearing rings.

The bearings are available in open and sealed versions. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields. Sealed bearings are maintenance-free and, as a result, allow particularly economical bearing arrangements. The self-alignment capacity of angular contact ball bearings is very small.

30..-B	5 - 40	double row, contact angle α = 25°
30..-B-2RSR	5 - 40	double row, lip seals on both sides, contact angle α = 25°
30..-B-2Z	5 - 40	double row, gap seals on both sides, contact angle α = 25°
32	10 - 110	main dimensions to DIN 628-3, double row
33	20 - 110	main dimensions to DIN 628-3, double row
38	10 - 80	double row

http://medias.schaeffler.de/medias/en!hp.ec/1_R*0*E4*5*open_3548_R#3548_R

Black Series Ball Bearing Units

Black series ball bearing units

The new Black Series Ball Bearing Units from FAG stand for easy mounting, quiet running and high reliability. The dimensions of the painted cast iron housings are according to JIS 1559 B. Radial insert ball bearings based on series 62 are fitted in the housings. The outer and inner rings of the radial insert ball bearings have a DUROTECT® B coating in order to provide improved anti-corrosion protection. The characteristic, black units are particularly suitable for applications with medium to high loads such as in agricultural machinery, drive technology, conveying technology, pumps or in the steel industry.

Simple mounting
Misalignments are compensated by the matched design of the housing and the radial insert bearing and the plus tolerance of the bore. Reworking of the shaft is no longer required. In addition, two self-retaining set screws that are offset by 120° securely locate the inner ring on the shaft. A suitable Allen key is supplied with every ball bearing unit. This reduces the mounting outlay to a minimum.

Quiet running and low friction
The Black Series Ball Bearing Units also make a convincing case during operation due to their proven FAG quality standard. The optimized internal geometry, honed raceways and high ball quality ensure quiet running and the low frictional torque of the radial insert ball bearings. This reduces the energy requirements of applications. The energy efficiency is further improved with the extremely low-friction plastic cage.

High reliability and long bearing operating life
Minimum friction also involves minimum heat generation and therefore a maximum grease operating life. The ball bearing units are supplied prelubricated and can be easily relubricated via a lubrication nipple if required. The seal that is firmly staked in the outer ring retains the grease in the bearing and thus allows easier relubrication. It has a vulcanized seal lip that effectively prevent dust and water entering the bearing. To protect the seal lip against damage an outer flinger shield is fitted on the inner ring. In addition, the radial insert ball bearings have an improved anti-corrosion protection. An antirotation pin locates the outer ring firmly in the housing. The robust Black Series Ball Bearing Units are most suitable for challenging operating conditions. The relevant application requires less maintenance. This saves the operator time and money.

Product range
The FAG Black Series Ball Bearing Units are supplied with both metric and inch bore diameters. Schaeffler Group Industrial is initially offering one pillow block housing unit as well as a two bolt and a four bolt flange unit. These will be followed by further housing types and a range of diameters that will be increased successively.

Benefits:

• Interchangeable according to JIS
• Simple mounting
• Economica
• Quiet running
• Energy efficient
• Long grease service life
• Low heat generation
• Reliable
• Robust
• Advanced anti-corrosive protection
• High load carrying
• Long operating life
• Extended maintenance intervals

Features:

• Housing dimensions according to JIS B 1559
• Grey cast iron housing, painted black
• Radial insert ball bearings based on ball bearing series 62
• Black oxide coated rings to improve corrosion resistance
• Bore diameters available in inch and metric dimensions
• One-piece seal with molded seal lip
• Polyamide cage with optimized friction behavior
• Factory lubricated, lubrication nipple for relubrication
• Two set screws offset by 120°
• Anti-rotating pin for location of the outer ring

http://www.schaeffler.sg/content.schaeffler.sg/en/products_services/inafagproducts/rotativ_products/spala__housing_units/housing_units/black_series/black_series.jsp

Informasi stok dan harga silakan hubungi SMS/WA 0812 107 9680

UCP 204-12 FAG

UCP 204-12 (3/4") FAG
Yang sedang banyak permintaan karena batu akik yang sedang booming.

Mengapa FAG ? Karena FAG lebih tahan terhadap karat.

Tersedia ukuran dan tipe lain serta merek-merek seperti FYH. TR. ASB

Bearing Presisi dan High Speed

Bearing Presisi dan High Speed untuk Mesin yang membutuhkan
ketelitian yang kecepatan.

6000 THBP63	IBC	6211 TBP63	IBC
6001 THBP63	IBC	6211-TB-P6-C3	FAG
6002 THBP63	IBC	6212 TBP63	IBC
6003 THBP63	IBC	6212-TB-P6-C3	FAG
6004 THBP63	IBC	6213 TBP63	IBC
6004-TB-P6-C3	FAG	6213-TB-P6-C3	FAG
6005 THBP63	IBC	6214 TBP63	IBC
6005-TB-P6-C3	FAG	6214-TB-P6-C3	FAG
6006 TBP63	FAG	6215 TBP63	FAG
6006 TBP63	IBC	6215 TBP63	IBC
6006-TB-P6-C3	FAG	6216 TBP63	IBC
6007 TBP63	IBC	6217 TBP63	IBC
6007-TB-P6-C3	FAG	6304 TBP63	IBC
6008 TBP63	IBC	6305 TBP63	IBC
6008-TB-P6-C3	FAG	6305-TB-P6-C3	FAG
6009 TBP63	IBC	6306 TBP63	FAG
6009-TB-P6-C3	FAG	6307 TBP63	IBC
6010 TBP63	IBC	6307-TB-P6-C3	FAG
6010-TB-P6-C3	FAG	6308 TBP63	IBC
6011 TBP63	IBC	6308-TB-P6-C3	FAG
6011-TB-P6-C3	FAG	6309 TBP63	IBC
6012 TBP63	IBC	6309-TB-P6-C3	FAG
6012-TB-P6-C3	FAG	6310 TBP63	IBC
6013 TBP63	IBC	6311 TBP63	IBC
6013-TB-P6-C3	FAG	6311-TB-P6-C3	FAG
6014 TBP63	IBC	6312 TBP63	IBC
6015 TBP63	IBC	6313 TBP63	IBC
6200 THBP63	IBC	6314 TBP63	IBC
6201 THBP63	IBC
6202 THBP63	IBC
6203 THBP63	IBC
6203-TB-P6-C3	FAG
6204 THBP63	IBC
6204-TB-P6-C3	FAG
6205 TBP63	IBC
6205 THBP63	IBC
6205-TB-P6-C3	FAG
6206 THBP63	IBC
6206-TB-P6-C3	FAG
6207 TBP63	IBC
6207 THBP63	IBC
6207-TB-P6-C3	FAG
6208 TBP63	IBC
6208-TB-P63	FAG
6208-TB-P6-C3	FAG
6209 TBP63	IBC
6209-TB-P63	FAG
6209-TB-P6-C3	FAG
6210 TBP63	IBC
6210-TB-P6-C3	FAG